3rd Gen APP Series Power AC Inverter / Charger 1kw-6kw

---Low idle consumption

--- High overload ability up to 300% of rated power(20 sec)

---Suitable for sensitive load, such as air conditioner, washing machine, fridges etc.

Product Detail

product detail

HTB14BOVHVXXXXXBXFXXq6xXFXXXd APP Series Pure Sine Wave Inverter is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak conversion efficiency of 92%.It is packed with unique features and it is one of the most advanced inverter/chargers in the market today. It features power factor corrected, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment.

Features of APP Pure Sine Wave Inverter, Charger

1. High overload ability up to 300% of rated power(20 sec)

2.Low quiescent current, low power “ Power Saving Mode ” to conserve energy

3. 4-step intelligent battery charging, PFC(Power Factor Correction) for charger

4. 8 pre set battery type selector plus de-sulphation for totally flat batteries

5. Powerful charge rate up to 110Amp, selectable from 0%-100%

6. 10 ms typical transfer time between battery and AC, guarantees power continuity

7.Smart remote control

8. 15s delay before transfer when AC resumes, extra protection for loads when used with generator

9. Allows start up and through power with depleted batteries10.30A/40A through current ability

11.Multiple controlled cooling fan

12. Extensive protections against various harsh situations

13. 13VDC battery recover point, dedicated for renewable energy systems

APP Series Inverter & Charger

Slide to the left for full table

Electrical Specifications
	Model	APP 1000W	APP 1500W	APP 2000W	APP 3000W	APP 4000W	APP 5000W	APP 6000W
Inverter Output	Continuous Output Power	1000W	1500W	2000W	3000W	4000W	5000W	6000W
	Surge Rating(20s)	3000W	4500W	6000W	9000W	12000W	15000W	18000W
	Capable of Starting Electric Motor	1HP	1.5HP	2HP	3HP	4HP	5HP	6HP
	Output Waveform	Pure Sine wave/Same as input(Bypass mode)
	Nominal Efficiency	>88%(Peak)
	Line Mode Efficiency	>95%
	Power Factor	0.9-1.0
	Nominal Output Voltage rms	100-110-120Vac / 220-230-240Vac
	Output Voltage Regulation	±10% RMS
	Output Frequency	50/60Hz ± 0.3Hz
	Short Circuit Protection	Yes, Current Limit Function (Fault after 1sec)
	Typical transfer Time	10ms(Max)
	THD	< 10%
DC Input	Nominal Input Voltage	12.0Vdc
		( 2 for 24Vdc, 4 for 48Vdc)
	Minimum Start Voltage	10.0Vdc
	Low Battery Alarm	10.5Vdc / 11.0Vdc
	Low Battery Trip	10.0Vdc / 10.5Vdc
	High Voltage Alarm & Fault	16.0Vdc
	High DC Input Recovery	15.5Vdc
	Low Battery voltage recover	13.0Vdc
	Idle Consumption-Search Mode	< 25 W when Power Saver On
Charge	Input Voltage Range	Wide: 90~135VAC / 164~243VAC;Narraw: 100~135VAC / 194~243VAC;
	Output Voltage	Depends on battery type
	Charger Breaker Rating	10A	10A	10A	20A	20A	30A	30A
	Max Charge Rate	35A / 70-90A Max (Charger Current Control)
	Over Charge Protection Shutdown	15.7V for 12Vdc ( 2 for 24Vdc, 4 for 48Vdc)
	Charger curve(4 stage constant current)4 step digital controlled progressive charge	Battery types ( 2 for 24Vdc, 4 for 48Vdc)
	Battery type	Fast Vdc				Float Vdc
	Gel U.S.A	14.0				13.7
	A.G.M 1	14.1				13.4
	A.G.M 2	14.6				13.7
	Sealed Lead Acid	14.4				13.6
	Gel Euro	14.4				13.8
	Open Lead Acid	14.8				13.3
	Calcium	15.1				13.6
	De-sulphation	15.5 for 4hrs
	Remote Control	Yes. Optional
Bypass & Protection	Input Voltage Waveform	Sine wave (Grid or Generator)
	Nominal Voltage	120Vac				230Vac
	Low Voltage Trip	80V/90V±4%				184V/154V±4%
	Low Voltage re engage	90V/100V±4%				194V/164V±4%
	High Voltage Trip	140V±4%				253V±4%
	High Voltage re engage	135V±4%				243V±4%
	Max Input AC Voltage	150VAC				270VAC
	Nominal Input Frequency	50Hz or 60Hz (Auto detect)
	Low Freq Trip	47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz
	Low Freq re engage	48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz
	High Freq Trip	55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz
	High Freq re engage	54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz
	Output Short circuit protection	Circuit breaker
	Bypass breaker rating	10A	15A	20A	30A	30A	40A	40A
	Transfer switch rating	30amp for UL & TUV				40amp for UL
	Max bypass current	30amp				40amp
Mechanical Specification	Mounting	Wall mount
	Inverter Dimensions(LWH)	382218179mm		442218179mm		598218179mm
	Inverter Weight	16KG	17KG	20KG	24KG	35KG	45KG	45KG
	Shipping Dimensions(LWH)	520315300mm		580315300mm		740315300mm
	Shipping Weight	18KG	19KG	22KG	26KG	37KG	47KG	47KG
	Display	Status LEDs / Status LEDs+LCD
	Standard Warranty	1 Year