Leave Your Message
您的浏览器版本不支持canvas
2nd Gen APV Pure Sine Wave Inverter, Solar Charger
Low Frequency Pure Sine Wave Inverter & Charger

2nd Gen APV Pure Sine Wave Inverter, Solar Charger

    product detail

    HT1_dYFFRNXXXagOFbXyAPV solar charger is a combination of APC inverter and solar charger. The APV pure sine wave inverter not only makes your solar system simple in wiring, but also has all the unique features from the inverter and solar charger.

    Features of APV Pure Sine Wave Inverter, Solar Charger1. APV pure sine wave inverter adopts low quiescent current, and power saver mode to reduce power consumption to 10W(3s sensing cycle)/3W(30s sensing cycle) *. It can extract max. power from various batteries with different protections.2. High overload ability of our APV charger is up to 300% rated power(20 sec.), and low voltage trip 10.5V/11V or 10V/10.5V is selectable.3. Our APV solar charger can achieve reverse current protection and battery temperature compensation, with the high efficiency MPPT function(97%). Auto input DC voltage can be detected between 12V/24V.4. Our APV pure sine wave inverter supports 3-step intelligent battery charging, and equips with 8 preset battery type selector for totally flat batteries. Its powerful charge rate up to 90Amp**. In addition, PFC(power factor correction) is adopted for charger, which has less power consumption than conventional units5. LCD status display, USB communication port, battery/AC priority switch are available for our APV pure sine wave inverter, it also has 17 alarms/warnings for easier operation and trouble-shooting, and ability to switch the unit on/off. In addition, select/deselect power saver mode can be used too.Note:*For 1KW one. **For some models.6. The APV solar charger has 15s delay before transfer when AC resumes, and the function of overload protection when it equips with generator. Also, it allows start up and through power with depleted batteries.7. 10ms typical transfer time between battery and AC, which guarantees power continuity of APV pure sine wave inverter. Its input AC voltage is selectable (184-253V or 154-253V) for different kinds of loads.

    Technical Parameters of APV Pure Sine Wave Inverter, Solar Charger

    Slide to the left for full table
    Electrical Specifications
      Model APV 1000W APV 2000W APV 3000W APV 4000W APV 5000W APV 6000W
    Output (Inverter Mode) Continuous Output Power 1000W 2000W 3000W 4000W 5000W 6000W
    Surge Rating 3000W 6000W 9000W 12000W 15000W 18000W
    Output Waveform Pure sine wave/same as input(bypass mode)
    Nominal Efficiency >88%(peak)
    Line Mode Efficiency >95%
    Power Factor 0.9-1.0
    Nominal OutputVoltage rms 120/230VAC
    Output Voltage Regulation ±10% rms
    Output Frequency 50Hz ± 0.3Hz/60Hz ± 0.3Hz
    Short Circuit Protection Yes( 10s after fault )
    Typical Line Stansfer Time 10ms(max.)
    THD <3%
    DC Input Nominal Input Voltage 12V 24V 48V
    Minimum Start Voltage 10V 20V 40V
    Low Battery Alarm 10.5V 21V 42V
    Low Battery Trip 10V 20V 40V
    High Voltage Alarm 16V 32V 64V
    Low Battery Voltage Recover 13V 26V 52V
    Idle Consumption-Search Mode < 25W when power saver on
    AC Charger Input Voltage Range 95-127VAC 194-243VAC 164-243VAC(W)
    Output Voltage Depends on battery type
    Max Charge Rate 35A / 70A
    Battery Initial Voltage for Start Up 0-15.7V for 12V( *2 for 24V, *4 for 48V)
    Over Charge Protection Shutdown 15.7V for 12V (*2 for 24V, *4 for 48V)
    Charger curve(4 stage constant current), battery types 4 step digital controlled progressive charge
    Battery type Fast V, float V ( *2 for 24v, *4 for 48v)
    Gel U.S.A 14 13.7
    A.G.M 1 14.1 13.4
    A.G.M 2 14.6 13.7
    Sealed Lead Acid 14.4 13.6
    Gel Euro 14.4 13.8
    Open Lead Acid 14.8 13.3
    Calcium 15.1 13.6
    De-sulphation 15.5 for 4hrs
    Remote Control Yes. Optional
    Bypass & Protection Input Voltage Waveform Sine wave (grid or generator)
    Nominal Voltage 120VAC 230VAC
    Low Voltage Trip 90V±4% 184V/154V±4%
    Low Voltage Re-engage 100V±4% 194V/164V±4%
    High Voltage Trip 140V±4% 253V±4%
    High Voltage Re-engage 135V±4% 243V±4%
    Max. Input AC Voltage 150VAC 270VAC
    Nominal Input Frequency 50Hz or 60Hz (auto detect)
    Low Freq Trip 47Hz± 0.3Hz for 50Hz, 57Hz± 0.3Hz for 60Hz
    Low Freq Re-engage 48Hz± 0.3Hz for 50Hz, 58Hz± 0.3Hz for 60Hz
    High Freq Trip 55Hz± 0.3Hz for 50Hz, 65Hz± 0.3Hz for 60Hz
    High Freq Re-engage 54Hz± 0.3Hz for 50Hz, 64Hz± 0.3Hz for 60Hz
    Overload Protection Circuit breaker
    Short Circuit Protection Circuit breaker
    Transfer Switch Rating 30amp 40amp
    Bypass Without Battery Connected Yes
    Max. Bypass Current 30amp 40amp
    Bypass Over Load Current 35amp: alarm 45amp: alarm
    Solar Charger Rated Voltage 12V 24V
    Rated Charge Current 40A
    Rated Output Current 15A
    Self Consumption < 10mA(at idle)
    Bulk Charge 14.5V(default) 29.0V(default)
    Floating Charge① 13.5V(default) 27.0V(default)
    Equalization Charge① 14.0V(default) 28.0V(default)
    Over Charge Disconnection 14.8V 29.6V
    Over Charge Recovery 13.6V 27.2V
    Over Discharge Disconnection① 10.8 V(default) 21.6V(default)
    Over Discharge Reconnection 12.3V 24.6V
    TemperatureCompensation① -13.2mV/℃ -26.4mV/℃
    Ambient Temperature 0-40℃(full load) 40-60℃(derating)
                   
    Mechanical Specifications
      Mounting Wall mount
      Inverter Dimensions(L*W*H) 598*218*179mm 470*190*340mm
      Inverter Weight 21KG 23KG 27KG 38KG 48KG 48KG
      Shipping Dimensions(L*W*H) 740*315*300mm 530*240*390mm
      Shipping Weight 23KG 25KG 29KG 40KG 50KG 50KG
      Display Status LEDs / status LEDs+LCD
      Standard Warranty 1 year

    APV Series Inverter&Solar Charger

    Electrical Specvifications
      Model APV1000W APV1500W APV2000W APV3000W APV4000W APV5000W APV6000W
    Output (Inverter mode) Continuous Output Power 1000W 1500W 2000W 3000W 4000W 5000W 6000W
    Surge Rating 3000W 4500W 6000W 9000W 12000W 15000W 18000W
    Output Waveform Pure Sine wave/Same as input(Bypass mode)
    Nominal Efficiency >88%(Peak)
    Line Mode Efficiency >95%
    Power Factor 0.9-1.0
    Nominal OutputVoltage rms 100-110-120Vac / 220-230-240Vac
    Output Voltage Regulation ±10% RMS
    Output Frequency 50Hz ± 0.3Hz/60Hz ± 0.3Hz
    Short Circuit Protection Yes( 1sec after fault )
    Typical Line Stansfer Time 10ms(MAX)
    THD <10%
    DC Input Nominal Input Voltage 12.0Vdc
    ( *2 for 24Vdc, *4 for 48Vdc)
    Minimum Start Voltage 10.0Vdc
    Low Battery Alarm 10.5Vdc / 11.0Vdc
    Low Battery Trip 10.0Vdc / 10.5Vdc
    High Voltage Alarm 16.0Vdc
    Low Batteryvoltagerecover 15.5Vdc
    Idle Consumption-Search Mode < 25 W when Power Saver On
    AC Charger Input Voltage Range Wide: 90~135VAC / 164~243VAC;Narraw: 100~135VAC / 194~243VAC;
    Output Voltage Depends on battery type
    Max Charge Rate 35A / 70-90A Max (Charger Current Control)
    Battery InitialVoltageforStart Up Circuit breaker
    Over ChargeProtectionShutdown 15.7V for 12V( *2 for 24Vdc, *4 for 48Vdc)
    Charger curve(4 stage constant current)4 step digital controlled progressive charge Battery types ( *2 for 24Vdc, *4 for 48Vdc)
    Battery type Fast V Float V( *2 for 24Vdc, *4 for 48Vdc)
    Gel U.S.A 14.0 13.7
    A.G.M 1 14.1 13.4
    A.G.M 2 14.6 13.7
    Sealed Lead Acid 14.4 13.6
    Gel Euro 14.4 13.8
    Open Lead Acid 14.8 13.3
    Calcium 15.1 13.6
    De-sulphation 15.5 for 4hrs
    Remote Control Yes. Optional
    Bypass & Protection Input Voltage Waveform Sine wave (Grid or Generator)
    Nominal Voltage 120VAC / 230VAC
    Low Voltage Trip 90V±4%/184V/154V±4%
    Low Voltage re engage 100V±4%/194V/164V±4%
    High Voltage Trip 140V±4%/ 253V±4%
    High Voltage re engage 135V±4%/243V±4%
    Max Input AC Voltage 150VAC/270VAC
    Nominal Input Frequency 50Hz or 60Hz (Auto detect)
    Low freq trip 47Hz± 0.3Hz for 50Hz, 57Hz± 0.3Hz for 60Hz
    Low freq re engage 48Hz± 0.3Hz for 50Hz, 58Hz± 0.3Hz for 60Hz
    High freq trip 55Hz± 0.3Hz for 50Hz, 65Hz± 0.3Hz for 60Hz
    High freq re engage 54Hz± 0.3Hz for 50Hz, 64Hz± 0.3Hz for 60Hz
    Overload protection Circuit breaker
    Short circuit protection Circuit breaker
    Transfer switch rating 30amp 40amp
    Max bypass current 30amp 40amp
    Bypass over load current 35amp: Alarm 45amp: Alarm
    Solar Charger Rated Voltage 12V/24V/48V
    Rated Charge Current 40A/60A
    Rated Output Current 15A
    Self Consumption < 10mA
    Bulk Charge 14.5V(default) ( *2 for 24Vdc, *4 for 48Vdc)
    Floating Charge 13.5V(default)
    Equalization Charge 14.0V(default)
    Over ChargeDisconnection 14.8V
    Over Charge Recovery 13.6V
    Over DischargeDisconnection 10.8 V(default)
    Over DischargeReconnection 12.3V
    TemperatureCompensation – 13.2mV/℃
    Ambient Temperature 0-40℃(full load) 40-60℃(derating)
    Mechanical Specifications Mounting Wall mount
    Inverter Dimensions(L*W*H) 598*218*179mm 470*190*340mm
    Inverter Weight 21KG 22kg 23KG 27KG 38KG 48KG 48KG
    Shipping Dimensions(L*W*H) 740*315*300mm 530*240*390mm
    Shipping Weight 23KG 24kg 25KG 29KG 40KG 50KG 50KG
    Display Status LEDs / Status LEDs+LCD
    Standard Warranty 1 Year

    HT1NZryFHddXXagOFbXBHT1XvbyFGldXXagOFbXGHT1DXHDFK8bXXagOFbXkHT1FwHCFQXbXXagOFbX8HT1Ja6CFL4bXXagOFbXG