UP Series Bi-Directional Power Inverter/Charger

UP series is a bidirectional power inverter/charger with DC-AC inverter and AC-DC battery charger functions to offer uninterrupted and stable power to loads. UP inverter can minimize electricity bill and optimize the usage of battery power through its builtin EMS system. Its comprehensive HMI offers user configurable and easy accessible operation to preset some basic data and working mode based on different applications.

Product Features:

• Built-in EMS achieves high efficient utilization of power energy among the grid and battery

• Reservation mode allows users to set up time for charging and discharging(peak shaving function)

• Switch time <8 ms ( to off grid mode )

• Can be used in single /dual/ three phase grid structures

• On-grid mode and off grid mode selectable

• Max efficiency 94%, THD<5% under full load

• Battery charging voltage and charging current programmable

• Friendly HMI allows user configuration

Product Detail

product detail

UP Series Bi-Directional Power Inverter/Charger

Technical Parameter

Model	UP 5048E
Battery
Battery Type	Lead~acid or Lithium~ion
Battery Voltage Range	40~60V
Max. Charge/Discharge Current	100A
Charging Curve	3 Stages
Charging Voltage	Depends On Battery Type （Schedule 1）
Output AC (Back Up)
Rated Output Power	5000W
Max. AC Output Power	5500W
Back Up Switch Time	＜8ms
Rated output voltage	230V (Single Phase)
Rated frequency	50Hz
Rated output current	22.7A
Input Voltage Waveform	Sine Wave
THDv (@linear load)	2%
No load loss	＜50W
Output AC(Grid side)
Rated Output Power	5000W
Max. AC Output Power	5500W
Rated grid voltage	230V（177~267V/90~267V） (Single Phase)
Rated grid frequency	50Hz/60Hz（47Hz~55Hz/57Hz ~65Hz）
Rated output current	22.7A
Power Factor	＞0.95
THDi	＜5%
Efficiency
Max. efficiency	95%
Protection
Anti islanding Protection	Integrated
PV String Input Reverse Polarity Protection	Integrated
Insulation Resistor Detection	Integrated
Output Over Current Protection	Integrated
Output Over Voltage Protection	Integrated
Overtemperature protection	Integrated
Surge protection	Integrated
General Data
Display	LED+LCD
Communication	RS485/CAN
Dimensions (WHD)	415488200mm
Weight	16kg
Installation Style	Rack/Wall Mounted
Topology	Transformer Isolation
Operating Temperature Range	﹣20~60℃ （Derating Treatment ls Required If The Radiator ls Above 80℃)
Humidity	0%~95% Relative Humidity (No Condensation
Cooling	Intelligent Air Cooling
Protection Degree	IP20
Max. operation altitude	2000m （>2000m Derating)
Warranty	1 Years

*Schedule 1: Battery Type And Charging Voltage
Battery Type	Boost/Vdc	Float/Vdc
Gel USA	56Vdc	54.8Vdc
AGM 1	56.4Vdc	53.6Vdc
LiFePO4_LF14	57.6Vdc	54.4Vdc
MnNiCo_N14	54.8Vdc	54.8Vdc
Custom	Set The Information According To The Specification Of The Battery