Products
LiFePO4 Battery Pack
- LiFePO4 Battery Pack
- Power Quality Products
- Off-Grid Inverter
- MPPT Solar Charge & Discharge Controller
- AC Converter / Battery Charger
-
AC Automatic Voltage Regulator
- 1st Gen Servo Type Voltage Stabilizer
- 2nd Gen Relay Type Voltage Stabilizer
- 2nd Gen Servo Type Voltage Stabilizer
- 3rd Gen Relay Type Voltage Stabilizer
- 3rd Gen Servo Type Voltage Stabilizer
- Smart Power Strip Type Voltage Stabilizer
- Wall Mounting Type Voltage Stabilizer
- Contact Type Voltage Regulator
- Step-Up & Down Transformer
- Uninterrupted Power Supply
0102030405
10.24Kwh Energy Storage System LiFePO4 battery pack
SYSTEM BREAKDOWN STRUCTURE
01020304
TECHNICAL PARAMETERS
| Model | Configuration | |||
| ESS6048E200P2 | MPPT-SCM 48100R | INVERTER-HP 6048DR | BATTERY- LFP 48100R*2 | Total energy |
| 100A(50A*2) | 6KW | 200AH(100AH*2) | 10.24kwh | |
| Battery | Description | |||
| Normal specification | ||||
| 1 | Rated Voltage | 51.2V | ||
| 2 | Rated Capacity | 200Ah | ||
| 3 | Rated Energy | 10.24KWH | ||
| 4 | Battery Configuration | 5.12KWH(16S1P) *2PCS | ||
| 5 | Battery Cell | 3.2V100AH 32PCS | ||
| Standard Charge | ||||
| 1 | Operation temperature range @charging | 0~45℃ | ||
| 2 | Rated charge voltage | 55.2±0.4V | ||
| 3 | Max charge voltage | 56.8±0.4V | ||
| 4 | Overcharge protection | 58.4±0.4V | ||
| 5 | Allowed MAX charge current(Total) | 110A withstand 30s (every pack 55A) | ||
| 6 | Peak charge current(Total) | 120A withstand 5s (every pack 60A) | ||
| 7 | Rated charge current(Total) | 100A (every pack 50A) | ||
| 8 | Recommend charge current(Total) | <100A | ||
| Standard discharge | ||||
| 1 | Operation temperature range @discharging | -20~60℃ | ||
| 2 | Output Voltage Range | 40~56Vdc | ||
| 3 | Recommend Working Range | 46~54Vdc | ||
| 4 | Discharge Cut-off voltage | 40V | ||
| 5 | Allowed MAX discharge current(Total) | 220A withstand 30s (every pack 110A) | ||
| 6 | Peak discharge current(Total) | 240A withstand 5s (every pack 120A) | ||
| 7 | Rated discharge current(Total) | 200A (every pack 100A) | ||
| 8 | Recommend discharge current(Total) | <200A | ||
| Communication | ||||
| 1 | RS485 | For LCD remote | ||
| 2 | CAN | PC control and monitor | ||
| Inverter (built-in) | Description | |||
| Normal specification | ||||
| 1 | Rated Power | 6KW | ||
| 2 | Output Waveform | Pure Sine Wave/Same as input (Bypass Mode) | ||
| 3 | Output Voltage | 240Vac(H-H)/120Vac(H-N) ±10% RMS | ||
| 4 | Output Frequency | 50 or 60± 0.3Hz (Inverter mode by sw4 setting) | ||
| 5 | Typical Transfer Time | 4-6ms typical,10ms(Max) | ||
| 6 | THD | < 3%(Rated voltage full R load) | ||
| 7 | AC Input Range | 184-253Vac (UPS mode) or 140-270Vac (GEN mode) | ||
| 8 | Customized AC Charger | Battery type selector position 9, special design for LFP, make the battery cycle life Maximization | ||
| 9 | MAX AC Charge Current | 50A | ||
| 10 | Battery priority Function | Setting by SW5 on position 1 (inverter mode valid), AC automatic come in when battery voltage low alarm at 48Vdc or 50Vdc | ||
| 11 | AC Bypass without charging | Battery type selector position 0 | ||
| MPPT (built-in) | Description | |||
| Normal specification | ||||
| 1 | PV POWER | 3.0KW*2 | ||
| 2 | PV Input Voltage | 60-145Vdc | ||
| 3 | MPPT Charging Voltage | 56.0Vdc (Fast charging)/54Vdc (Float charging) | ||
| 4 | MPPT Output Current | 50A*2 | ||
| Mechanical Characteristics | ||||
| ESS6048E200P2 | Dimension H*W*D | Shipping H*W*D | Weight(N.W.) | Weight(G.W.) |
| 940*560*785mm | 1100*700*870mm | 180KG | 200KG | |
APPLICATION
- Previous: 4th Gen HP Series Inverter with Charger 1-18KW
- Next: UPV-S Series Solar + Storage Hybrid Inverters
description2